Dark Light
AVCOM Of Virginia Inc.

SA-MOD-1-9-A-2S


The SA-MOD-1 spectrum analyzer is based on Avcom’s software-defined-radio technology platform designed to exceed today’s performance challenges. The analyzer is intended for embedded applications required to operate under challenging conditions. Avcom’s newest analyzer technology provides excellent performance by employing high-performance DSP, and FPGAs. Integrators can now embed a full-function spectrum analyzer in a very small volume into systems operating in austere and rugged environments. Communication with the module is achieved via ethernet and Avcom’s Graphical User Interface; the EVO GUI software. It provides a feature-rich set of functions to control, monitor & alarm, while recording. The system can also be accessed via a POSIX-Compliant API, available from Avcom.

PRODUCT DATASHEET

  • Software-Defined-Radio SDR
  • Compact, Rugged Design
  •  Rugged Design with Extended Temperature Range
  • Monitoring & Control (M&C) via Ethernet
  • Integrates with Avcom’s EVO-GUI or Comprehensive API
  •  Low SWaP (Size, Weight, and Power)

Versatile Remote Control Software

The SA-MOD-1-9 can provide discrete remote monitoring and control from anywhere in the world. The SA-MOD-1- 9 is monitored and controlled using the Avcom Remote Control Software EVO-GUI via USB, or Ethernet. The EVOGUI has an intuitive user interface that is easy to use with no special training required. Up to sixteen windows can be displayed at one time. The Avcom GUI will run on the WINDOWS OS. The GUI is preconfigured for actual remote analyzers we keep online so that you can try the software before purchasing.

SKU: SAMOD19-2 Category: Tag:
PARAMETER PERFORMANCE
FREQUENCY RANGE 900 – 2200 MHz
SPAN WIDTH 1200 MHz
RESOLUTION BANDWIDTH 1kHz, 3kHz, 10kHz, 100kHz, 300kHz, 1MHz
REFERENCE LEVELS Selectable: -10dBm to -40dBm
SPURIOUS FREE DYNAMIC RANGE 50dB
AMPLITUDE ACCURACY ±1dB typical
SCALE PER DIVISION 10dB/div
USABLE INPUT RANGE -100dBm to -10dBm
FREQUENCY ACCURACY ±1kHz typical
MAXIMUM RF INPUT 25VDC Max (DC blocked); -10dBm
INPUT IMPEDANCE 50Ω
RF INPUT CONNECTOR SMA
INTERFACE CONNECTORS Ethernet: 6-pin Molex. USB. Power: 2-pin Molex
POWER SUPPLY REQUIREMENT 15-24 VDC; < 3W
PHYSICAL DIMENSIONS (BOARD; ENCLOSED) 3” x 3.5” x 1.057”
HUMIDITY 0 to 95%, non-condensing
TEMPERATURE RANGES; OPERATING/STORAGE -40 to +70 °C / -40 to +85 °C
OPERATING ALTITUDE RANGE 40,000 ft; 12,000m
WEIGHT 8 oz.; 200 g

EVO-GUI Software

  • EVO – GUI Software
  • EVO – GUI User Manual

Download Exe File Download GUI User Manual

Release Notes

    v1.2.3.0
    • Fix spectrum mode support on old SBS2 units that did not properly support AVCOM_SBS_QueryFeature
    • Fix rbw selection in BR preview mode to make sure rbw is valid
    • Update measured frequency to fix corrected sbs2api unit error
    • Improve graph utilization by getting unit specified dynamic range using AVCOM_SA_GetDynamicRange
    • Fix reconnect bug when using quick connect
    • Fix bug when input was unable to be set
    • Fix bug on set input for SBS1 products with different reflvls
    • Update sbs1api to v1.8.3.0
    • Update sbs2api to v2.10.3.0
    • Update aovhpbasic to v1.3.3.0
    v1.1.6.0
    • Add hw and bom version to analyzer info screen
    • Add Linux build options
    • Update default demo slot names
    • Change default trace color to yellow
    • Remove unused help buttons
    • Fix dB and dBm typos
    • Increase max graph range to 30dBm
    • Add an optional advanced feature menu and full support for sweep optimization within the new menu
    • Update sbs2api to v2.8.4
    • Use AVCOM_BR_GetLatestData over AVCOM_BR_GetLastSweep if BR supports it
    • Add support for changing network settings over USB
    • Add search on all network adapters options to fix most common network search problems
    v1.0.3.0
    • Initial v1.0 Release
 

EVO-GUI (Graphical User Interface)

After installing and running the GUI software, click on the