Dark Light
AVCOM Of Virginia Inc.

SBS2-2150E-RSA


The RSA Spectrum Analyzer offers a rack mount version of the rugged embedded Single Board (SBS) product. It measures L-band and 10 MHz reference signals. The popular SBS has been successfully integrated into other OEM systems and is now offered in a rack-mount enclosure to meet your demanding requirements. The versatile free software GUI will monitor and control the RSA over IP and the hardware can be configured with connectors of your choice.

PRODUCT DATASHEET

  •  Designed To Be Integrated Into OEM Systems
  •  Designed For Satcom On-The-Move (SOTM)
  •  Rugged Design With Extended Temperature Range
  •  Precise And Accurate Amplitude And Frequency Response
  •  Full Remote Control And Monitoring Via Ethernet/USB Using Free Remote Control Software (GUI)
  •  Posix Compliant “C” – Access Via GUI Or Available API
  •  10MHz Reference Signal Viewing Capability
  •  3kHz Resolution Bandwidth Option Available

Performance & Specifications

The SBS2-2150E-RSA input covers an extended L-Band frequency of 950MHz to 2150MHz and will also allow monitoring of a 10MHz reference signal. The SBS2-2150E-RSA design only requires an external input voltage, accepting a wide range of +15 to +24VDC @ 7W. Communication is provided via Ethernet or USB. The SBS2-2150E-RSA supports both commercial Ethernet and USB connectors or header connectors for easier embedded system integration. Along with resolution bandwidths of 1MHz to 10 kHz, a 3kHz RBW option is available for applications requiring very detailed signal analysis. SBS2-2150E-RSA allows changes to the number of data points used if application needs to optimize refresh rate verses resolution. The data point number can be adjusted from 1-4000 points in the control software.

Versatile Remote Control Software (GUI)

The SBS2 can provide discrete remote monitoring and control from anywhere in the world. The SBS2 is monitored and controlled using the Avcom Remote Control Software EVO-GUI via USB, or Ethernet. The EVO-GUI has an intuitive user interface that is easy to use with no special training required. Up to sixteen windows can be displayed at one time. The Avcom GUI will run on the WINDOWS OS.

SKU: SBS22150ERSA Category: Tag:
FREQUENCY COVERAGE: 950MHz – 2150MHz (L-Band)

8MHz – 12MHz

SPAN WIDTH: 0 to 1250 MHz (L-Band)

0 to 2MHz (10MHz Reference)

RESOLUTION BANDWIDTH: 10kHz, 30kHz, 300kHz, 1MHz
RF SENSITIVITY: -115 dBm at 10kHz RBW typical
 

REFERENCE LEVEL:

950MHz – 2150MHz Selectable 0 dBm to -40 dBm in 1 dB steps

10MHz – Fixed at 10 dBm

SCALE: 1-10 dB/Div
DYNAMIC RANGE: 75 dB or greater typical
AMPLITUDE ACCURACY: ± 1 dB typical
FREQUENCY ACCURACY: ± 1 kHz typical
ADJUSTABLE DATA POINTS: 1 – 4000
INPUT CONNECTOR: 50Ω “BNC” is standard.
OPERATING TEMPERATURE RANGE: -30°C to +70°C
SIZE: 19” W x 18” L x 1.75” H

48.26 x 45.72 x 4.45 cm

WEIGHT: 7lbs/3.18kilograms
POWER
INTERFACE: RG/45, CAT-5, USB
POWER SUPPLY: 15 to 24 VDC, 7W AC/DC Converter Furnished.
ENVIRONMENTAL
OPERATING TEMPERATURE: -30°C to 70°C
STORAGE TEMPERATURE: -40°C to 85°C
HUMIDITY: 0 to 95%, non-condensing

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SBS2-2150E-RSA”

There are no reviews yet.

Labview (legacy) GUI Software (National Instruments - LabView)

NOTE 1: SBS2 and Beacon Receiver products require GUI v4.0 or newer

NOTE 2: The sbs2net tool to help set SBS2 IP Address should no longer be needed when using GUI V4.0rc59 or later

August 21, 2019 - GUI v4.0rc59 pre-release update available!

⇒ Any previous v4.0 version should be replaced with v4.0rc59

Downloads for Windows XP and greater.

If you have previously installed an Avcom GUI, then you have the necessary drivers and can save time by downloading the Lite version which is a GUI update only. These are zipped (.zip) installers. Save to local drive then unzip to install.

Save file to local drive then double-click to install.

System Requirements for Windows GUIs: Windows XP and greater

CPU: Pentium III 1.5GHz or equivalent (Pentium 4/M or equivalent recommended)

Memory: Depends on # Windows shown. 3GB RAM for 12 Windows

Changes: Issue Fixed: Incorrect marker frequencies. Additional Beacon Receiver settings and features.

v4.0rc59 GUI includes SBS2 support

 
(153MB)

v4.0rc59 GUI includes SBS2 support

GUI for Windows only and drivers, FTDI USB drivers, and Net-SNMP installer

(11MB)

v4.0rc59 GUI includes SBS2 support

 

April 17, 2013 - Standard GUI v3.0.2 Released!

Downloads for Windows 2000 (SP3) and greater.

No SBS2 or Beacon Receiver support

  • RSA-2500, RSA-2150
  • SBS-2500, SBS-2150
  • PSA-2500, PSA-2150, PSA-4200
  • SNG-2500, SNG-2150
  • CLM-2500
  • LPT-2500
  • DRSA-2500
  • TRSA-2500

Standard GUI

The Standard GUI is what is shipped on CD with all of our analyzers. If you have already downloaded the Full version then you have the necessary drivers and can save time by downloading the Lite version which is a GUI update only.

These are zipped (.zip) installers. Save to local drive then unzip to install.

System Requirements for Windows GUIs: Windows 2000(SP3) and greater

CPU: Pentium III 1.5GHz or equivalent (Pentium 4/M or equivalent recommended)

Memory: Depends on # Windows shown. 3GB RAM for 12 Windows

(130MB)
v3.0.2 GUI for Windows only and drivers, FTDI USB drivers, and Net-SNMP installer
(10MB)
v3.0.2 GUI for Windows only. No drivers for GUI or SNMP.
Beta GUI (0)
Not available at this time.
(40MB)
Instructions for the GUI and the Run-Time Engine download.
(72MB)
v2.9.4 Full GUI for Rockwell Collins TAILWIND test kit
(104MB)
v2.8.6 Full GUI for SWE-DISH by Rockwell Collins
 

Miscellaneous Notes

USB Driver - Please select the link below to download the latest USB driver for your operating system.

Windows Users - for ease of installation select "setup executable" from the Comments column USB Drivers

AVCOM Remote Control

 

Spectrum Analyzer and GUI User Guides (PDF format)

 

Troubleshooting

Windows Security prevents GUI from saving SA List

Analyzer Ethernet Configuration and Troubleshooting

 

PSA & MSA FIRMWARE

MSA-4570E

MSA-45E

PSA-1727B

PSA-37XP

PSA-45D

Select the zipped file for your model

 

PSA and MSA SitePlayer GUI

This is the last GUI that supports remote spectrum analyzers with the SitePlayer type ethernet controller.

(80MB)

v2.8.4.4 GUI and all drivers for 1024x768 monitors

 

ADA Software

(5MB)

For PSA-65C and PSA-37D