Dark Light
AVCOM Of Virginia Inc.
Embedded-Beacon-Receiver

SBS2-2150E-S3C0-B

Small Compact Design: The SBS2-2150 is the latest Avcom product designed from the ground up with the system integrator in mind. The compact design measures 3.75”x 5.75” (9.525 x 14.605cm) so that it can easily be integrated into another piece of equipment, inside a small satellite terminal, or as an integral part of the satellite antenna itself.

PRODUCT DATASHEET

Embedded Single Board L-Band
Spectrum Analyzer

● Track CW or BPSK Beacon, Track Carrier Power with TPT (Tuned-Power-Tracking), Track Wide Carrier (e.g. DVB) with CEPT(Carrier-Edge-Power-Tracking)
● Beacon Receiver & Spectrum Analyzer Single Board!
● Low SwaP-C; (Size, Weight, Power, Cost)
● Satcom-On-The-Move (SOTM) Applications
● Monitoring & Control (M&C) via Ethernet and USB
● Integrated Support via EVO-GUI Software-Included
● Comprehensive API for Easy Integration

Performance & Specifications

The SBS2-2150 input covers an extended L-Band frequency of 950MHz to 2150MHz and will also allow monitoring of a 10MHz reference signal. The single board design only requires an external input voltage, accepting a wide range of +15 to +24VDC @ 7W. Communication is provided via Ethernet or USB. The single board supports both commercial Ethernet and USB connectors or header connectors for easier embedded system integration. Along with resolution bandwidths of 1MHz to 10 kHz, a 3kHz RBW option is available for applications requiring very detailed signal analysis. SBS2-2150E allows changes to the number of data points used if application needs to optimize refresh rate verses resolution. The data point number can be adjusted from 1-4000 points in the control software.

 

SKU: SBS2-2150E-S3C0-B Category: Tag:
PARAMETER PERFORMANCE
RF
INPUT CONNECTOR: SMA, 50 Ohm
INPUT FREQUENCY RANGE: 950 to 2150MHz
TUNING STEP SIZE: 1kHz
INPUT LEVEL RANGE: 0 to -115dBm
MAXIMUM INPUT POWER LEVEL: +10 dBm max
DETECTION BANDWIDTH: 10 to 750 kHz
TRACKING BANDWIDTH: 10 to 150 kHz
DETECTED BEACON LEVEL FILTERING: Low-Pass, User-Selectable: 0.25 Hz, 0.5 Hz, 1.0 Hz, 2.0 Hz, 3.0 Hz
SEARCH/TRACK RATE: User-Selectable: 10 Hz, 25Hz
ACQUISITION TIME: <1 second typical
ADJUSTABLE DELAY BEFORE LOCK: 0 to 5000 milliseconds
TRACKING TYPE: BEACON TRACKING – CW, BPSK (no demodulation). Track power and frequency
POWER TRACKING – TPT– Track power at frequency/BW, CEPT– Track Wide Carrier Power like DVB
ACQUISITION/TRACKING LEVEL: User Bandwidth             RBW Filter            Min C/N
≤ ± 37 kHz                    3kHz                40 dB-Hz
≤ ± 92 kHz                    10kHz               44 dB-Hz
≤ ± 375 kHz                  30kHz               48 dB-Hz
M & C
ETHERNET: 10/100 Auto, RJ-45 or 8-pin header
IP ADDRESS: DHCP or Static
USB: Type-B and 3-pin header
INCLUDED CONTROL APPLICATION Avcom EVO-GUI Software (Windows)
APPLICATION PROGRAMMING INTERFACE (API) POSIX-compliant ‘C’ Pre-built Libraries for Windows and Linux x86 Source code available
PROTOCOL: High-reliability closed-loop with error checking
RECEIVER OUTPUT VIA PHYSICAL OUTPUTS: Yes
RECEIVER OUTPUT VIA M&C INTERFACE: Yes
RECEIVER OUTPUTS
CONNECTOR: 6-pin header (pigtail supplied)
ANALOG SIGNAL STRENGTH INDICATOR LEVEL: 0 to 10 VDC, 50 mA max
ANALOG SLOPE: 0.1 to 3.0 Volts/dB
ANALOG SLOPE POLARITY: Positive or Negative
ANALOG OUTPUT FILTERING: Low-Pass, 0.5 Hz, fixed
DIGITAL LOCK INDICATOR OUTPUT: 0 to 3.3 VDC
DIGITAL LOCK INDICATOR OUTPUT POLARITY: Adjustable (H=LOCK or L=LOCK)
POWER
CONNECTOR: 2-pin Header. Pigtail supplied.
POWER SUPPLY: 15 to 24 VDC, 7W
PHYSICAL
DIMENSIONS: 3.75” (9.525cm) W x 5.75” (14.605cm) L x 1.1” (2.794cm) D
WEIGHT 0.8lbs/360g
ENVIRONMENTAL
OPERATING TEMPERATURE: 40°C to 70°C
STORAGE TEMPERATURE: -40°C to 85°C
HUMIDITY: 0 to 95%, non-condensing
OPERATING ALTITUDE: 8000 m; 26,000 ft

EVO-GUI Software

  • EVO – GUI Software
  • EVO – GUI User Manual

Download Exe File Download GUI User Manual

Release Notes

    v1.4.2.0
    • Includes all fixes from v1.2.4.0
    • Add 100Hz BR update rate
    • Add external inverted downconverter support
    • Add inverted C-Band downconverter to default LO offset list
    • Add slot 31 to default SA list
    • Fix lo offset not loading correctly bug for br config frequency
    v1.2.4.0
    • Includes all fixes from v1.2.3.0
    • Update sbs2api to v2.13.3.0 (add BR-MOD-1-9-B USB support)
    v1.2.3.0
    • Fix spectrum mode support on old SBS2 units that did not properly support AVCOM_SBS_QueryFeature
    • Fix rbw selection in BR preview mode to make sure rbw is valid
    • Update measured frequency to fix corrected sbs2api unit error
    • Improve graph utilization by getting unit specified dynamic range using AVCOM_SA_GetDynamicRange
    • Fix reconnect bug when using quick connect
    • Fix bug when input was unable to be set
    • Fix bug on set input for SBS1 products with different reflvls
    • Update sbs1api to v1.8.3.0
    • Update sbs2api to v2.10.3.0
    • Update aovhpbasic to v1.3.3.0
    v1.1.6.0
    • Add hw and bom version to analyzer info screen
    • Add Linux build options
    • Update default demo slot names
    • Change default trace color to yellow
    • Remove unused help buttons
    • Fix dB and dBm typos
    • Increase max graph range to 30dBm
    • Add an optional advanced feature menu and full support for sweep optimization within the new menu
    • Update sbs2api to v2.8.4
    • Use AVCOM_BR_GetLatestData over AVCOM_BR_GetLastSweep if BR supports it
    • Add support for changing network settings over USB
    • Add search on all network adapters options to fix most common network search problems
    v1.0.3.0
    • Initial v1.0 Release
 

EVO-GUI (Graphical User Interface)

After installing and running the GUI software, click on the

Avcom Gui Software - January 9, 2025

Related products

Any Questions ? Call us! 804-794-2500
Address
7729 Pocoshock Way N Chesterfield, VA 23235
© AVCOM - All Rights Reserved
Any Questions ? Call us! 804-794-2500