-
Beacon Receivers
EVO-RBR-2290A1S
The EVO-RBR-2290A1S beacon receiver based on Avcom’s software-defined-radio technology platform designed to exceed today’s performance challenges. The receiver is intended for antenna systems applications required to operate under challenging conditions. Avcom’s newest beacon receiver technology provides excellent performance by employing high-performance DSP, and FPGAs. Integrators can now install a full-function beacon receiver into systems operating in austere and rugged environments as well as standard teleport and earth station indoor environments. Communication with the receiver is achieved via ethernet and Avcom’s Graphical User Interface, the EVO GUI software. It provides a feature-rich set of functions to lock on and provide a DC output voltage proportionate to the received satellite beacon signal. The system can also be accessed via a customer implemented POSIX-Compliant API. Source code is available from Avcom.
SKU: EVO-RBR-2290A1S
BR-MOD-1-9-A-1S
The BR-MOD-1-9 is a full SDR satellite beacon receiver designed on a completely new platform to meet today’s system challenges. It is a robust and reliable product featuring many capabilities to provide rugged and reliable operation in embedded application. A CW satellite beacon carrier can be acquired quickly and tracked in On-the-Move, as well as in
fixed-site applications. It provides a voltage output from 0 to 10 VDC proportional with the input L-band signal. In addition, the receiver can lock on and track BPSK-type carrier signals AND is uniquely capable of locking on and tracking a DVB- like carriers utilizing an exclusive Avcom-only Carrier- Edge-Power-Tracking (CEPT) function.
Avcom’s EVO-GUI software is included and provides a full- featured set of tools for robust operations for any application. Avcom provides API protocol documentation and support for developing POSIX-C compliant APIs for your application. Please contact salesrfq@avcomofva.com for documentation and support.
- Track Conventional Beacon Carrier
- Compact, Rugged Design
- For Integration in On-The-Move Applications
- Monitoring & Control (M&C) via Ethernet
- Integrates with Avcom’s EVO-GUI
- Comprehensive API for Easy Integration
- Extended Temperature Range
- Low SWaP (Size, Weight, and Power)
INPUT CONNECTORS: | SMA, 50 Ohm |
INPUT FREQUENCY RANGE: | 930 to 2175MHz |
TUNING STEP SIZE: | 1kHz |
INPUT LEVEL RANGE: | -10 to -100 dBm |
MAXIMUM INPUT POWER LEVEL: | – 10 dBm max |
DETECTION BANDWIDTH: | 10 to 750 kHz |
TRACKING BANDWIDTH: | 10 to 150 kHz |
DETECTED LEVEL FILTERING: | Low-Pass, User-Select: 0.25 Hz, 0.5 Hz, 1.0 Hz, 2.0
Hz, 3.0 Hz |
SEARCH/TRACK RATE: | User-Selectable: 10 Hz, 25Hz |
ACQUISITION TIME: | <1 second typical |
ADJUSTABLE DELAY BEFORE LOCK: | 0 to 5000 milliseconds |
ACQUISITION/TRACKING LEVEL: | Minimum C/No, 39 dB-Hz |
BEACON/CARRIER TYPE: | CW, BPSK (No Demod), CEPT(Carrier-Edge-Power- Track) on DVB (No Demod) |
M & C | |
ETHERNET: | 10/100; Magnetics on-board, 4-pin Molex |
IP ADDRESS: | DHCP or Static |
INCLUDED CONTROL APPLICATION: | Avcom GUI (Windows) |
APPLICATION PROGRAMMING INTERFACE (API): |
POSIX-compliant ‘C’
Pre-built Libraries for Windows and Linux x86 Source code available |
PROTOCOL: | High-reliability closed-loop with error checking |
RECEIVER OUTPUT VIA PHYSICAL OUTPUTS: | Yes |
RECEIVER OUTPUT VIA M&C INTERFACE: | Yes |
RECEIVER OUTPUTS | |
CONNECTOR: | 6-pin Molex |
ANALOG SIGNAL STRENGTH INDICATOR OUTPUT: | 0 to 10 VDC, 25 mA |
ANALOG SLOPE: | 0.1 to 3.0 Volts/dB |
ANALOG SLOPE POLARITY: | Positive or Negative |
ANALOG OUTPUT FILTERING: | Low-Pass, 0.5 Hz, fixed. |
DIGITAL LOCK INDICATOR OUTPUT: | 0 – 3.3 VDC |
DIGITAL LOCK INDICATOR OUTPUT POLARITY: | Adjustable (H=LOCK or L=LOCK) |
POWER | |
CONNECTOR: | 2-pin Molex |
POWER SUPPLY: | 15 – 24 VDC; < 3 W |
PHYSICAL | |
DIMENSIONS: | 3 in. x 3.5 in. x 1.057 in. |
WEIGHT: | 8 oz; 200g |
ENVIRONMENTAL | |
OPERATING TEMPERATURE: | -40°C to 70°C |
STORAGE TEMPERATURE: | -40°C to 85°C |
HUMIDITY: | 0 to 95%, non-condensing |
OPERATING ALTITUDE: | 40,000 ft; 12,000 m |
Based on 0 reviews
Be the first to review “BR-MOD-1-9-A-1S” Cancel reply
EVO-GUI Software
- EVO – GUI Software
- EVO – GUI User Manual
Release Notes
-
v1.1.6.0
- Add hw and bom version to analyzer info screen
- Add Linux build options
- Update default demo slot names
- Change default trace color to yellow
- Remove unused help buttons
- Fix dB and dBm typos
- Increase max graph range to 30dBm
- Add an optional advanced feature menu and full support for sweep optimization within the new menu
- Update sbs2api to v2.8.4
- Use AVCOM_BR_GetLatestData over AVCOM_BR_GetLastSweep if BR supports it
- Add support for changing network settings over USB
- Add search on all network adapters options to fix most common network search problems
- Initial v1.0 Release
EVO-GUI (Graphical User Interface)
After installing and running the GUI software, click on the
There are no reviews yet.